Edimax Technology BR-6428nS - Manual (Page 29)

28
2‐4‐3 Using “PPPoE xDSL” as broadband connection type
1. If your ISP is providing you Internet access via PPPoE (Point‐to‐Point Protocol over
Ethernet), select “PPPoE xDSL”.
Item Name Description
User Name Input the user name assigned by your ISP here.
Password Input the password assigned by your ISP here.
Service Name Give this Internet service a name (optional).
MTU Input the MTU value of your network connection here. If you
do not know, use the default value.
Connection Type Please specify a connection type here. There are 3 options:
1. “Continuous” keeps the Internet connection alive all the
time.
2. “Connect on Demand” only connects to the Internet when
you initiate Internet connection.
3. “Manual” connects to the Internet only when the
“Connect” button on this page is clicked, and disconnects
when the “Disconnect” button is clicked.
Idle Time Out Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
“Connect on Demand” is selected.
2. Click “OK” to complete setup.
3. When the following message appears, click “Apply” to save the changes and restart
the broadband router. The router will take about 30 seconds to restart.