Edimax Technology BR-6428nS - Manual (Page 41)

40
3‐2‐2 Static IP
Some ISP will give you a fixed IP address, and ask you to use this IP address to establish
Internet connection. In this case, you have to select this connection type to establish
connection with your ISP.
Please note that if your ISP is assigning a fixed IP address to you by DHCP or PPPoE, do not
select this connection type. Please contact your ISP’s service hotline to make sure you really
need to use static IP as connection type.
Item Name Description
IP Address Input the IP address assigned by your ISP here.
Subnet Mask Input the subnet mask assigned by your ISP here.
Default Gateway Input the default gateway assigned by your ISP here. Some
ISPs may call this “Default Route”.
NOTE: You must use the addresses provided by your ISP. Inputting incorrect values will
cause malfunction.
If you wish to select another connection type as broadband connection type, click ‘Back’; or
you can click ‘OK’ to finish with quick setup. You’ll see the following messages: