Edimax Technology BR-6428nS - Manual (Page 55)

54
the channel designated by your wireless ISP.
Site Survey Click ‘Select Site Survey’ button, then a “Wireless Site
Survey Table” will pop up. It will list all available
access points nearby. Select the access point
designated by your wireless ISP in the table and the
router will join wireless network through this access
point.
Security Settings If the access point enables wireless security, you have
to follow the same settings in order to access the
access point. Click to set security settings for this
connection (Please go to section ‘2‐7‐3 Wireless
Security’ for detailed instructions).
After you finish with all settings, please click ‘Apply’ (6) button and the following message
will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously‐saved value, please click
‘Cancel’ button.