Edimax Technology WP-S1000 User Manual
Page 10
9
3.
Connect the video (VGA) cable of the projector to the video (VGA) port (labeled as ‘VGA’)
located at the back of the WPS.
4.
Connect the audio cable of external speaker (powered) or audio amplifier to the audio
port (labeled as ‘AUDIO’) located at the back of the WPS. (Skip this step if this is not
required.)
5.
Connect the network cable to the network port (labeled as ‘LAN’) located at the back of
the WPS. (Skip this step if you use wireless network connection).
6.
Connect the power adapter to the power port of the WPS and then plug in the power
adapter to the electrical power socket on the wall.
7.
Power on the WPS by pressing ‘PWR’ button located at the back of the WPS. ‘Power’
LED will be lit when it is switched on.
8.
Please switch on the projector, and you should be able to see the welcome screen of this
projector server on projector or CRT / LCD monitor. A 4-digit login code and the IP
address of projector server will be displayed, please remember them or write them down,
you’ll need these information when you need to connect the computer to this projector
server by software.
4-Digit Random Login Code
Current
Configuration