Edimax Technology WP-S1000 - Manual (Page 38)

37
5.6 Network Setup
You can setup network parameters in this page.
Description of every setup items are listed below:
Obtain an IP
address
automatically
Choose this item to obtain the IP address for this projector server
automatically from the DHCP server on local network. If you don’t
have a DHCP server on local network, you have to select ‘Use the
following IP address’ and setup the IP address manually.
Use the following IP
address
Choose this item to setup a fix IP address for this project server
manually. You have to input IP address, subnet mask, and the IP
address of gateway manually. If you don’t know how to input these
values, please ask network administrator.
DHCP Server Setup You can choose to enable or disable the built-in DHCP server for
client computers. You can choose ‘Auto’ to let WP-S1000 projector
server decide by itself, or choose ‘Disable’ if you want to use other
DHCP server on the network. Please note that if you have clients
using wireless network to connect to this projector server, please
choose ’Auto’.
If DHCP server is enabled, please check your IP range (‘Start IP’ and
‘End IP’).