Edimax Technology WP-S1000 - Manual (Page 46)

45
also use a pen or pin to press the ‘RESET’ button located at the
back of projector server.
6. Ask your network administrator or a qualified technician for help.
The image
displayed on
projector or CRT /
LCD monitor is
distorted
1. Make sure the video cable is securely connected to ‘VGA’ jack at
the back of the projector server. You may also check the video
connection to the projector or CRT/LCD monitor.
2. Make sure the projector or CRT/LCD monitor works with the video
output setting of projector server. You can change to a lower
resolution and see if the display on projector or CRT/LCD monitor
becomes normal (see Chapter 5.7 for detailed instructions for
changing the output resolution).
3. Replace the video cable used to connect the projector server and
your projector or CRT/LCD monitor with a new one.
4. Contact your projector or CRT/LCD monitor manufacturer for help.
The wireless
signal reception is
bad
1. If you’re using this projector server in an extremely big room, you
may wish to try another antenna with high signal gain for better
signal reception. Contact your dealer of purchase for detailed
information. DO NOT ATTEMPT TO REAPLCE THE ANTENNA
BY YOURSELF IF YOU’RE NOT SURE WHAT ANTENNA YOU
SHOULD USE!
2. Move your computer closer to the projector server if possible, or
use wired connection.
3. The wireless antenna on the projector server should be
perpendicular to the ground for better reception.
Cannot connect
wirelessly to the
projector server
1. If you set the projector server to use wireless encryption, all
wireless clients should input the correct WEP key before they can
get connected.
2. Make sure the SSID of the projector server is found by your
computer, and you connect to the correct SSID for the projector
server.
3. Reboot your computer and try again.
No audio 1. Check the volume setting of your computer and your audio
speaker / amplifier.
2. Check the audio cable that connects the projector server and your
audio speaker / amplifier.
3. Replace the audio cable with a new one.