Edimax Technology WP-S1000 - Manual (Page 29)

28
2. Click ‘Flash Drive’ dropdown menu to select the drive letter that represents your USB flash
disk. If you only have one flash disk inserted, setup wizard should be able to identify the USB
flash disk automatically. If the USB flash disk is not correctly identified, please insert the USB
flash disk once again, and click ‘Next’.
3. Setup wizard will copy all necessary files to the USB flash disk, please be patient, and do
not remove the USB flash disk in this process. When you see this message, the wizard is
completed successfully and the USB flash disk is ready to use. Click ‘Finish’ to exit and
remove the USB flash disk.