Edimax Technology WP-S1000 - Manual (Page 12)

11
2.2 ) Make software USB Flash (PnS Token) by yourself
**Note: The Software USB flash disk is an option item. We recommend
you to build the USB PnS Token from WP-S1000 with your USB flash disk/
pen drive by yourself.
Before start making an USB Flash Disk, please follow the instruction on Quick Installation
Guide page 7 to 13 “Step 2ii) Software Installation (From the WPS)”. And then, follow the
instruction below to build your USB flash disk/pen drive.
You’ll need:
„ An USB flash disk/pen drive with capacity larger than 5MB (formatted)
„ Installed the presentation client software into the USB flash disk/pen drive
Insert the USB flash disk into your computer’s USB port and start the presentation client
software. Select ‘Make PnS Token’ from the menu of client software, then follows the
instructions to build a new USB flash disk:
1. Click ‘Next’ when setup wizard appears.
2. Click ‘Flash Drive’ dropdown menu to select the drive letter that represents your USB flash
disk. If you only have one flash disk inserted, setup wizard should be able to identify the USB
flash disk automatically. If the USB flash disk is not correctly identified, please insert the USB
flash disk once again, and click ‘Next’.