Edimax Technology AR-7186WnB - Manual (Page 10)

10
2. Hardware Installation
1. Connect the ADSL line.
Connect the line port of the router of the device to the modem interface of a
splitter using a telephone cable. Connect a telephone to the Phone interface
of the splitter using a telephone cable. Connect the Line interface of the
splitter to your existing, incoming line.
The splitter has three interfaces:
 Line: Connect to a wall phone jack (RJ-11 jack).
 Modem: Connect to the ADSL jack of the device.
 Phone: Connect to a telephone set.
2. Connect the router to your LAN network.
Connect the LAN interface of the router to your PC, hub or switch using an
Ethernet cable.
Note:
Use twisted-pair Ethernet cables to connect the router to a hub or
switch.