Edimax Technology AR-7186WnB - Manual (Page 34)

34
Connection Type Please check with your ISP the method of
multiplexing. In Bridge Mode, please select
“ADSLTYPE_ROUTER_LLC” or
“ADSLTYPE_ROUTER_VCMUX”.
4.2.3. Dynamic IP Address
Parameter Description
VPI
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its
valid value is in the range of 0 to 255. Enter
the correct VPI provided by your ISP. By
default, VPI is set to 8.
VCI
Virtual channel identifier (VCI) is the virtual
channel between two points in an ATM
network. Its valid value is in the range of 32 to
65535. (0 to 31 is reserved for local
management of ATM traffic) Enter the correct
VCI provided by your ISP. By default, VCI is set
to 35.