Edimax Technology AR-7267WnB - Manual (Page 23)

19
IP Subnet Mask Enter the Subnet Mask assigned by your ISP.
Gateway Enter the Gateway assigned by your ISP.
NAT NAT (Network Address Translation), an Internet standard that
enables a local-area network (LAN) to use one set of IP
addresses for internal traffic and a second set of addresses for
external traffic. When NAT is enabled, the router will help to
make all necessary IP address translations for the PC
connected to the router to access the Internet.
Dynamic Route Dynamic routing allows routing tables in routers to change as
the possible routes change. This router supports RIP1, RIP2-B
and RIP2-M protocols for dynamic routing. After the RIP
protocol is selected, please choose the RIP direction from
“None”, “Both”, “IN Only” or “OUT Only”.
IGMP Porxy Enable or disable IGMP proxy feature.
When you are done making changes, click on SAVE to save your changes.
 PPPoE/PPPoA