Edimax Technology AR-7267WnB - Manual (Page 24)

20
Parameter Description
User Name Enter the username exactly as your ISP assigned.
Password Enter the password that your ISP has assigned to you.
Encapsulation Please check with your ISP the method of multiplexing. In PPPoE/PPPoA
mode, please select “PPPoE LLC”, “PPPoE VC-Mux”, “PPPoA LLC”, or
“PPPoA VC-Mux”.
Bridge Interface This router has built-in ADSL modem and is able to connect to ISP
directly. Alternatively, if you want to use the dial up software to
manually connect to the ISP, you have to activate the ”Bridge
Interface”.
Connection Always On – The connection will be kept always on. If the connection is
interrupted, the router will re-connect automatically.
Connect On-Demand – Only connect when you want to surf the
Internet. “Close if idle for xx minutes” is set to stop the connection
when the network traffic is not sending or receiving after an idle time.
Connect Manually – After you have selected this option, please go to
Status page. You will see the “Connect” button, click it and the router
will connect to the ISP. If you want to stop the connection, please click
“Disconnect” button.
TCP MSS Option The “TCP MSS Option” enables the configuration of the maximum
segment size (MSS) for transient packets that traverse a router,
specifically TCP segments in the SYN bit set, when PPPoE is being used