Edimax Technology AR-7267WnB - Manual (Page 28)

24
DHCP Select whether DHCP is Disabled, Enabled or Relay.
Start IP If the DHCP Server is enabled, please set the “Starting IP
Address” which will be the first IP Address assigned to the LAN
client. By default, the “Starting IP Address” is 192.168.2.100.
IP Pool Count You can select a particular IP address range for your DHCP
server to issue IP addresses to your LAN Clients.
By default, the “IP Pool Count” is 100. The IP range is starting
from IP 192.168.2.100 to 192.168.2.199.
Lease Time In the Lease Time setting you can specify the time period that
the DHCP Server lends an IP address to your LAN clients. The
DHCP will change your LAN client’s IP address when this time
threshold period is terminated.
DNS Relay A Domain Name System (DNS) server is like an index of IP
addresses and Web addresses. If you type a Web address into
your browser, such as “www.router.com”, a DNS server will
find that name in its index and the matching IP address.
Please select “Use Auto Discovered DNS Server Only” to auto
set the DNS Server. If there is a DNS server that you would
rather to use, please select “Use Discovered DNS Server Only”
and you need to specify the IP address of that DNS server.
Primary DNS Enter the ISP’s DNS Server IP Address; or you can specify your
own preferred DNS Server IP Address.
Secondary DNS This is optional. You can enter another DNS Server’s IP
Address as a backup. The secondary DNS will be used should
the Primary DNS fail.
IP Address Enter the IP Address and MAC address for the DHCP
reservation.