Edimax Technology WD-1000TR - Manual (Page 10)

9
3. Installation
Step 1: Setup the WD‐1000TX transmitter
Connect an HDMI‐ready computer to the WD‐1000TX:
(1) Connect the WD‐1000TX’s (transmitter) “HDMI IN” to the HDMI‐ready computer’s “HDMI OUT”
or Source player’s “HDMI OUT” with an HDMI cable (included).
(2) Power Connection :
A. Connect dual USB ports of HDMI‐ready computer with mini USB port (POWER labeled on
back panel) of WD‐1000TR transmitter through the USB Y‐cable for power supply.
One mini USB connector is located on one end of USB Y‐cable and another two USB type A
connectors are located on another end of USB Y‐cable.
B. Connect the power adapter with a mini USB connector to the mini USB port of the
WD‐1000TR for power supply, and then to a wall socket.
The LED indicator in the POWER button should lights up in blue when the WD‐1000TX is
connected to the computer through USB.