Edimax Technology WD-1000TR - Manual (Page 18)

17
Step 4: Mounting the WD‐1000RX to the Wall
(1) Refer the drawing of the bottom page
that have relative position of the key
holes and attach this paper on wall.
(2) Drill pilot holes.
(3) Insert the supplied two Anchors into the
wall.
(4) Insert two screws into the anchors. Leave
1/8” length for mounting the Transmitter
or receiver.
(5) Place WD‐1000RX key holes over the
protruding screws and slide down into
position.