Edimax Technology WD-1000TR - Manual (Page 8)

7
2.2 Overview
WD‐1000TX (TX): PC to TV Transmitter
ƒ Front Panel Buttons and LEDs
X Power Button with LED Indicator
Press to turn the transmitter on and off. The
indicator in the power button is lit solid blue
when the power is on, and turns red in standby
mode.
Note:
Make sure you have connected the WD‐1000RX
correctly to your HDTV set with an HDMI cable,
and have selected the correct HDMI input on
your TV.
If you have more than one pair of WD‐1000TR,
each transmitter and receiver should be at least
6.5 feet away from one another..
If both the transmitter and the receiver exist in
the same room, the suggested the distance
between the two is 6.5 feet minimum.
ƒ Main Unit Back Panel
X HDMI IN
Connect Transmitter to PC / Notebook or any
Source device that have an HDMI port using a
provided HDMI cable.
Y USB Power
You can connect the transmitter to the desktop
or laptop’s USB port with the provided USB
Y‐cable, Or use the power adapter with mini USB
connector included in the package to supply the
power.
The transmitter will then be
USB‐powered. In most cases, only one USB port
is needed, but in other cases 2 USB ports of the
computer may be taken up for sufficient power
supply.