Edimax Technology WD-1000TR - Manual (Page 13)

12
(4) During the warm‐up period, the POWER LED will blink in blue until the signal link between the
WD‐1000TX and the WD‐1000RX is established.
Ensure your TV set or projector is in “HDMI input” mode, and is already powered on.
(5) If you have electronic devices such as a cordless phone, wireless access point/ router sharing
the 5GHz channel frequency, when you use it near the WD‐1000TR, you may experience
disturbed picture or diminished sound quality. Press the INFO./CHANNEL button on the top
of Receiver box to change the WD‐1000TR to different channels.
Note:
A. Changing the WD‐1000TR to a different wireless channel: