Edimax Technology AR-7284WnB - Manual (Page 11)

6
Rear Panel
Figure 2 Rear panel
The following table describes the interface of the device.
Interface/Button Description
Line
RJ-11 interface that connects to the telephone set
through the telephone cable.
WPS/Reset
Press the button for 3 seconds to enable
WPS.
Press the button for 8 seconds to restore
factory default configurations and reboot the
device.
LAN1/2/3/4
Ethernet RJ-45 interface is connected to the
Ethernet interfaces of computers or Ethernet
devices.
USB device interface is connected to PC or other
network devices.
Power
Power Jack that connects to power adapter. The
power adapter output is: 12 V DC, 800 mA.
ON/OFF Power switch.
1.4 System Requirements
Recommended system requirements are listed as follows:
An 10 baseT/100BaseT Ethernet interface on your PC
A hub or switch (connected to multiple PCs through one
of Ethernet interfaces on this device)
Operating system: Windows 98SE, Windows 2000,
Windows ME, or Windows XP