Edimax Technology AR-7284WnB - Manual (Page 44)

39
3.3.1.4 WPS Settings
Select WPS Settings. The page shown in the following figure
appears.
WPS Authentication: The WPS service is enabled by
default.
There are three setting methods you can use in the Wi-Fi
Protected Setup. In order to use wps authentication, you can
select one method from three methods.
Press the WPS button on the rear panel for 3 seconds.
In
the WPS Settings page, click PBC. After setting, click
Apply to make the setting effective.
In the WPS Settings page, enter the PIN codes provided
by station (STA), then click PIN. After settings, click
Apply to take the settings effective.