Edimax Technology AR-7284WnB - Manual (Page 33)

28
3.2.4 Local Network
You can configure the LAN IP address according to actual
requirements. The preset IP address is 192.168.1.1. You can
use the default settings and DHCP service to manage the IP
settings for the private network. The IP address of the device
is the base address used for DHCP. To use the device as
DHCP server on your LAN, the DHCP IP address pool must
be compatible with the IP address of the device. The IP
address available in the DHCP IP address pool changes
automatically if you change the IP address of the device.
You can also enable the secondary LAN IP address. The two
LAN IP addresses must be in different networks.
Choose Setup > Local Network. The Local Network page
shown in the following figure appears.
By default, Enable DHCP Server is selected for the Ethernet
LAN interface of the device. DHCP service will assign IP
address to client computer connected to LAN interface. When
the device acts as DHCP server, it will become the gateway of
all computers on intranet. If you change the IP address of the
device, you must also change the range of IP addresses in