Edimax Technology AR-7284WnB - Manual (Page 89)

84
This page displays event log data in the chronological manner.
You can read the event log from the local host or send it to a
syslog server. Available event severity levels are as follows:
Emergency, Alert, Critical, Error, Warning, Notice,
Informational and Debugging. In this page, you can enable or
disable the system log function.
The procedure for logging the events is as follows:
Step 1 Select Enable Log.
Step 2 Select the display mode from the Mode drop-down
list.
Step 3 Enter the Server IP Address and Server UDP Port if
the Mode is set to Both or Remote.
Step 4 Click Apply to apply the settings.
Step 5 Click View System Log to view the detail information
of system log.
3.5 Status
You can view the system information and monitor device
performance.
3.5.1 Device Info
Choose Status > Device Info. The page shown in the
following figure appears.