Edimax Technology AR-7284WnB - Manual (Page 14)

9
Figure 3 Connection diagram (without telephone sets before the splitter)
Connection type 2: Figure 4 displays the application diagram
for the connection of the device, PC, splitter and telephone
sets when a telephone set is placed before the splitter.
As illustrated in the following figure, the splitter is installed
close to the device.
Figure 4 Connection diagram (with a telephone set before the splitter)
Connection 1 is recommended.
Note:
When connection type 2 is used, the filter must be installed close to
the telephone cable. See Figure 4. Do not use the splitter to replace
the filter.