Edimax Technology AR-7284WnB - Manual (Page 15)

10
Installing a telephone before the splitter may cause
connection problem between the device and the central office,
or failure of Internet access, or slow connection speed. If you
really need to add a telephone set before the splitter, you
must add a microfilter before a telephone set. Do not connect
several telephones before the splitter or connect several
telephones with one microfilter.
2.2 USB Installation
To connect the DSL gateway to the USB port of the PC, follow
the instructions listed as follow:
Step 1 Connect one end of the USB cable to the USB port of
the DSL gateway. As the cable has two different
connectors and each connector is keyed, you may
need to try both connectors and different orientations.
Step 2 Connect the other end of the USB cable into the USB
port of the PC.
Step 3 For USB installation on Windows XP, once the PC
powers up, a message appears in the system tray
indicating that new hardware is found.
Step 4 The Found New Hardware Wizard dialog box
appears. Select Install the software automatically
(Recommended) and insert the Manual and Driver
CD-ROM. Click Next. The system searches CD-ROM
for the best USB driver.