Edimax Technology EdiView32 - Manual (Page 15)

15
automatically. If a match cannot be made, the
camera manufacturer and model number will need
to be entered manually.
Live View &
Recording Channel:
If the IP Camera supports
multiple video streaming, you can set ‘Live View
Channel’ and ‘Recoding Channel’ as independent
streaming. For example, you want to reduce your
computer resource loading; you can set the ‘Live
View Channel’ to MJPEG/MPEG4 video stream at a
lower resolution, while setting the ‘Recording
Channel’ to MJPEG/H264 video stream at high
resolution.
Groups: Add the camera to a group as an alternate camera
management method. For more details on advanced
settings for ‘Groups’, please refer to Settings.
Search: Auto-search the local network for IP camera, but
only
supported IP camera models will be detected.
If the video streams for “Live View Channel” and “Recording
Channel” are set as independent video streaming, the camera
status will always be shown as “Live View Channel”.
1-3-3. Remove Camera
In order to remove the camera, its status must not be active.
If a camera is removed, then all recording data associated with
the camera will be deleted.
1-3-4. Edit Camera
The display window will be the same as ‘Adding New Camera’.
However, the camera manufacturer and camera model fields cannot
be edited.