Edimax Technology EdiView32 - Manual (Page 43)

43
5. Setup
5-1. General
Click ‘Setting’ on the main tool bar to enter setup page. Click ‘General’ on
the left tool bar as shown below:
5-1-1. Take Picture
This is used to setup the storage location to place auto-saved image
file when the user captures image in monitor frame. For this function to
be active, ‘Auto Save’ check box must be selected. The captured
image will be exported in bitmap (BMP) format and stored at user
designated folder with date and time used as image file name. If this
check box is not selected, then whenever the user captures an image,
a ‘save-as’ window will pop up, allowing user to determine the storage
location and the file name of the captured image.
5-1-2. Computer – Screen Saver
Configures screen saver activity. For example, you might prefer the
system not entering screen saver mode when the monitoring software
is running.
5-1-3. Computer – Screen Shutdown
This configures computer monitor activation status. For example, you
might prefer the system not shutting down the monitor when the
monitoring software is running.