Computer – sleep mode, Language, Account – change password – Edimax Technology EdiView32 User Manual
Page 44: User management
44
5-1-4. Computer – Sleep Mode
This configures the computer sleep mode status. For example, you
might prefer the system not entering sleep mode when the monitoring
software is running.
5-1-5. Language
Set up the monitoring software user interface language.
5-1-6. Account – Change Password
Change the password used to activate this monitoring software. Click
‘Change Password’ and enter the old password, along with a new
password in the new password and confirm new password field. Click
‘OK’ to apply change, and ‘Cancel’ to abandon change.
5-1-7. User Management
This sets the monitoring software user’s privilege level. There are 3
different privilege levels and they are:
Administrator: Access to all functionality, including user account
management.
PowerUser: Access to all functionality, but does not include user
account management.
Viewer: Access rights to view camera video streaming only.
“Lock” can be used to quickly change active user account. The
preset account name is “admin” and the password is “1234”.
User account setup window is as shown below: