Aspect controller (pan, tilt & zoom), Emap navigator – Edimax Technology EdiView32 User Manual
Page 22
Advertising
![background image](/manuals/233778/22/background.png)
22
1-5.
Aspect Controller (Pan, Tilt & Zoom)
If your camera supports PTZ, then you can use this function to sequential
the camera horizontal/vertical. If the selected camera does not support PTZ,
this control panel becomes inoperable.
1-6.
EMap Navigator
This frame allows user to browse the physically location of the IP Camera.
The image below is a full map view. The green selector represents
displayed map area, as shown below:
Advertising