Edimax Technology EdiView32 - Manual (Page 41)

41
example, you might want to enable motion detection function after
office hours. Refer to Scheduled Recording for scheduling setup.
4-2-5. Motion Detection Setup
This setup menu is intended for configuring camera video streaming
detection zone. The configuration image is as shown below:
Add Detection Zone
Click ‘Add’ button to add a new detection zone. There is no restriction
on the number of detection zones.
When the IP camera’s resolution has been changed, all associated
detection zones will be removed.
Resize and Move
On the bottom right hand side of the white detection zone frame, when
the mouse cursor becomes a bidirectional arrow, left click and drag the
mouse cursor to resize detection zone. Within the red detection zone
frame, left click and drag the mouse cursor to move detection zone.
Detection Condition Setup
Every detection zone individually contains the following 3 detection
conditions:
Detection Frequency: Configures the detection frequency of the
detection zone. Configurable values are high, normal and low.