Edimax Technology AR-7286WnB - Manual (Page 46)

46
Field Description
Mask
ISP
Gateway
Enter the default gateway provided by your ISP.
Connection
Type You can select LLC or VC-Mux. In this example, the
encapsulation mode is set to 1483 Bridged IP LLC.
5.3.4. PPPoE/PPPoA
Select PPPoE/PPPoA, click NEXT, and the page as shown in the following
figure will appear.
The following table describes the parameters in this page:
Field Description
Username
Enter the username for PPPoE dial-up, which is provided by
your ISP.
Password
Enter the password for PPPoE dial-up, which is provided by
your ISP.
VPI
Virtual path identifier (VPI) is the virtual path between two
points in an ATM network. Its valid value is between 0 and
255. Enter the correct VPI provided by your ISP. By default,
VPI is set to 8.
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 1
and 65535. Enter the correct VCI provided by your ISP. By
default, VCI is set to 35.
Connection You can select LLC or VC-Mux. In this example, the