Edimax Technology AR-7286WnB - Manual (Page 55)

55
Field Description
Connection Setting
Connection
You can choose Always On (Recommended),
Connect On-Demand or Connect Manually.
TCP MSS Option
You can set a TCP MSS value. The range is from 100
to 1452. The default is 1400.
IP Common Options
Default Route You can enable or disable default route.
IPv4 Address
Get IP Address You can choose Static or Dynamic.
Static IP Address
You can enter the IP address for dial-up, which is
provided by your ISP.
IP Subnet Mask The default is 255.255.255.255.
Gateway
You can enter the gateway IP for dial-up, which is
provided by your ISP.
TCP MTU Option
You can set a TCP MTU value. The range is from 100
to 1500. The default is 1492.
NAT
Select whether to enable Network Address
Translation (NAT) function. If you do not enable NAT,
you must add a route on the uplink equipment,
otherwise Internet access will fail. Normally NAT is
enabled.
Dynamic Route You can select RIP1, RIP2-B or RIP2-M.
Direction You can select None, Both, IN Only or OUT Only.
Multicast
IGMP (Internet Group Multicast Protocol) is a
session-layer protocol used to establish membership
in a multicast group. The ADSL Router supports both
IGMP version 1 (IGMP v1) and IGMP version 2 (IGMP
v2). Select Disabled to disable it.
IPv6 Address
DHCP IPv6 Provide address assignment to hosts to include