Edimax Technology AR-7286WnB - Manual (Page 63)

63
Field Description
wireless client searches.
Use WPS
WPS technology allows new customers without a
previously-established account to securely connect
to your network at the Wi-Fi hotspot, create and
pay for an account, and access the Internet.
WPS Settings
WPS state WPS state is displayed here.
WPS mode Select PIN code or PBC.
Start WPS Click to start WPS..
WPS progress Indicates current WPS progress status.
Reset to OOB
Click Reset to OOB (out of box) to reset all Wi-Fi
settings to default.
SSID
Enter an SSID. The service set identification (SSID) is
a unique name to identify the router in the wireless
LAN.
Authentication
Type Select from Disabled, WEP-64Bits, WEP-128Bits,
WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK.
Wireless MAC Address Filter
Active Activate or deactivate wireless MAC address filter.
Action
Set Allow or Deny for listed MAC addresses. This
function can be used to allow or deny access to
certain wireless clients based on their MAC
Address.
Mac Address #1–8 You can set up to eight MAC addresses.
5.5. Advanced Setup
In the navigation bar, click Advanced Setup. In the Advanced Setup page that
is displayed contains Firewall, Routing, NAT, QoS, VLAN and ADSL.