Edimax Technology AR-7286WnB - Manual (Page 59)

59
Field Description
Auto Discovered, the router accepts the firstly-received
DNS assignment from one of the PPPoA, PPPoE or MER
enabled PVC(s) during the connection establishment. If
select User Discovered, enter the IP addresses of the
primary and secondary DNS servers.
Primary DNS
Server DNS server FOR wan and LAN
Secondary
DNS Server DNS server FOR wan and LAN
Radvd Enable
You may choose to enable or disable Radvd. The Router
Advertisement Daemon (Radvd) is an open-source
software product that implements link-local
advertisements of IPv6 router addresses and IPv6
routing prefixes using the Neighbor Discovery Protocol
(NDP).
Radvd Mode You may choose Auto or Manual.
Auto Prefix Select Enable or Disable.
RA Flag Set You may choose ManagedAddr or Other Config.
DHCP6 Server You may choose to enable or disable DHCP6 Server.
DHCP6 Mode You may choose Auto or Manual for the DHCP6 Server.
Dynamic Host Configuration Protocol (DHCP) allows the individual PC to
obtain the TCP/IP configuration from the centralized DHCP server. You can
configure this router as a DHCP server or disable it. The DHCP server can
assign IP address, IP default gateway and DNS server to DHCP clients. This
router can also act as a surrogate DHCP server (DHCP proxy) where it relays
IP address assignment from an actual DHCP server to clients. You can enable
or disable DHCP server or DHCP proxy.
In the DHCP field, choose Disabled, the page shown in the following figure
appears.