Fein MOtlx_6_25 User Manual
Page 10
10
en
Instruction manual for SuperCut.
Symbols, abbreviations and terms used.
For your safety.
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this pneumatic tool before you have
thoroughly read and completely understood this
Instruction Manual including the figures, specifica-
tions, safety regulations and the signs indicating DAN-
GER, WARNING and CAUTION.
Please also observe the relevant national industrial safety
regulations (e.g. in Germany: BGV A3).
Non-observance of the safety warnings in the specified
documentation can lead to serious injury.
This Instruction Manual should be kept for later use and
enclosed with the pneumatic tool when passing it on or
selling it.
Safety instructions.
1) Work place
a)
Keep your work place clean and tidy.
Untidiness and
bad lighting in the working area can lead to accidents.
b)
Do not operate the pneumatic hacksaw in the vicinity
of any flammable fluids, gases or dust particles where
there is risk of explosion.
Pneumatic hacksaws pro-
duce sparks that could ignite the dust or vapours.
Symbol, character
Explanation
Be absolutely sure to read the enclosed documentation such as the Instruction Manual and
the General Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving back and forth.
Disconnect the compressed-air supply prior to this workstep. Otherwise there may be dan-
ger of injury caused by unintentional starting of the pneumatic tool.
Use eye-protection during operation.
Use a dust mask during operation.
Use ear protection during operation.
Use protective gloves during operation.
Confirms the conformity of the pneumatic tool with the directives of the European Com-
munity.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Weight according to EPTA-Procedure 01/2003
Character
Unit of measure, international Unit of measure, national
Explanation
p
bar
bar
Operating pressure
Nm
3
/min
Nm
3
/min
Air consumption
n
S
1/min
1/min
Rated oscillation rate
L
wA
dB
dB
Sound power level
L
pA
dB
dB
Sound pressure level
K…
Uncertainty
m/s
2
m/s
2
Acceleration
m, s, kg, A, mm, V, W, Hz,
N, °C, dB,
/min, m/s
2
m, s, kg, A, mm, V, W,
Hz, N, °C, dB, rpm, m/s
2
Basic and derived units of measure from the
international system of units
SI
.
WARNING
V
N
.
WARNING
3 41 01 101 06 0.book Seite 10 Freitag, 4. April 2008 8:33 08