Hama VMDD26 User Manual
Page 3
ENGLISH
Assembly Instructions for Model: VMDD26
Thank you for choosing a Sanus Systems Vision Mount wall mount. The VMDD26 is designed to mount up to 63” Flat panel televisions
weighing up to 175 lb. to a vertical wall. It allows you to tilt the television from +5° to -15°. It will also extend 25.75” away from the
wall, swivel up to ± 75°, and roll ± 6°.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a quali-
fied contractor or contact Sanus at 800.359.5520 or www.sanus.com. Our customer service representatives can quickly assist you with
installation questions and missing or damaged parts. Replacement parts for products purchased through authorized dealers will be
shipped directly to you. Check carefully to make sure that there are no missing or defective parts. Never use defective parts. Improper
installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified by Sanus Sys-
tems. Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please
call Sanus Systems before returning products to the point of purchase.
Note: The supplied wall mounting hardware is not for metal stud, concrete, brick or old cinder block walls. If you are uncertain about
the nature of your wall, consult an installation contractor. Sanus makes every effort to assure all necessary television mounting hardware
is included. If the hardware you need is not included please consult your local hardware store or call Sanus Systems.
Note: Wall must be capable of supporting 5 times the weight of the television plus the wall mount!
Required Tools: 3/16” drill bit, wrench set, phillips screw driver.
Supplied Parts: *Some parts not shown at same scale
(1) Wall Plate - a
(1) Arm Assembly - b
(1) Preventor - c*
(2) 1” Diameter Tube - d
(2) Monitor Bracket - e
(4) Vise Assembly - f*
Sanus Systems 2221 Hwy 36 West. St. Paul, MN 55113 11.14.05
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
VMDD26ins_011206_ML.indd 3
1/16/06 4:39:06 PM