Hama VMDD26 - Manual (Page 6)

ENGLISH
Step 2: Mounting the Monitor Brackets to a television with a curved back or any other obstruction.
First, determine the diameter of the Bolt (t,u,v,w) your TV requires by hand threading them into the threaded insert on the back of the TV.
If you encounter any resistance, stop immediately! Once you have determined the correct diameter, see the appropriate Diagram below.
You will thread the Bolt through the appropriate Lock Washer (x,y,z,aa), a Washer (dd,ee), the Monitor Bracket (e), a spacer (bb,cc) and
finally into the TV. For the M4 or M5 diameter bolt, you will need another M4/M5 Washer between the Monitor Bracket and the Spacer.
Make sure the Monitor Brackets are vertically centered on the TV and level with each other.
M4 Diameter Bolt M6 Diameter Bolt
t v
x z
dd ee
dd
bb cc
e e
Diagram 2
M5 Diameter Bolt M8 Diameter Bolt
e e
u w
y aa
dd ee
dd
bb cc
VMDD26ins_011206_ML.indd 6 1/16/06 4:39:15 PM