STIEBEL ELTRON SN ... SLi с 01.11.2007 User Manual
Page 10
Advertising
10
5. Guarantee
4. Environment and recycling
3. Fault Repair
for the user and engineer
Fault
Cause
Rectification
No hot water despite hot water fit-
ting being fully open.
No power.
User / Engineer:
Check fuses on domestic system.
Limescale on jet regulator.
User / Engineer:
Clean or replace jet regulator on fitting.
Protective temperature restrictor
(STB) has tripped.
Engineer:
Eliminate cause of fault (replace thermostat).
Note on protective temperature restrictor (STB) / re-
strictor:
2 kW unit: STB resets automatically when the unit
power supply is disconnected
3.3 kW unit: Replace restrictor.
Boiling sound in heater.
Limescale in heater.
Engineer:
Descale unit.
Table 2
!
!
Advertising