Operation safety, Safety, Appliance description – STIEBEL ELTRON SHW 200-400 ACE с 06.05.2013 User Manual
Page 15
OPERAtIOn
Safety
En
gl
ish
www.stiebel-eltron.com
SHW ACE |
15
1.2 other symbols in this documentation
Note
General information is identified by the symbol shown
on the left.
f
f Read these texts carefully.
Symbol
Meaning
Material damage
(Appliance and consequential losses, environmental pol-
lution)
Appliance disposal
f
f This symbol indicates that you have to do something. The ac-
tion you need to take is described step by step.
1.3 units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
2. safety
2.1 intended use
This pressure appliance is designed to heat DHW.
This appliance is designed for domestic use. It can be used safely
by untrained persons. The appliance can also be used in a non-do-
mestic environment, e.g. in a small business, as long as it is used
in the same way.
Any other use beyond that described shall be deemed inappropri-
ate. Observation of these instructions and of instructions for any
accessories used is also part of the correct use of this appliance.
Any modifications or conversions to the appliance void all war-
ranty rights.
2.2 general safety instructions
WARNING Burns
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
!
WARNING Injury
The appliance can be used by children aged 8 and above,
as well as by persons with limited physical, sensory or
mental abilities, or with a lack of experience and knowl-
edge, provided they are supervised or have been in-
structed in the safe use of the appliance and understand
the resulting dangers. Children must not play with the
appliance. Cleaning and user maintenance may not be
carried out by unsupervised children.
Note
The appliance is under pressure.
During the heat-up process, expansion water will drip
from the safety valve. If water continues to drip when
heating is completed, please inform your heating con-
tractor.
2.3 ce designation
The CE designation shows that the appliance meets all essential
requirements according to the:
- Electromagnetic Compatibility Directive
- Low Voltage Directive
2.4 test symbols
See type plate on the appliance.
3. appliance description
The appliance electrically heats domestic hot water, with the tem-
perature controlled via the temperature selector. Subject to the
power supply, the water is heated automatically to the required
temperature. You can use the appliance to supply one or several
draw-off points.
The steel cylinder is coated on the inside with special directly ap-
plied enamel and is equipped with a thermometer and a protective
anode. The anode with consumption indicator protects the cylin-
der interior from corrosion. The cylinder is enclosed by thermal
insulation and a casing.
The appliance is also protected against frost on the temperature
setting "cold" as long as the power supply is guaranteed. The ap-
pliance switches on in good time and heats the water. The water
supply line and the safety assembly are not protected against frost
by the appliance.
!