HONDA 2013 CR-Z - Manual (Page 252)

251
uu Checking and Maintaining Wiper Blades u Changing the Front Wiper Blade Rubber
4. Slide the wiper blade out from its holder by
pulling the tabbed end out.
5. Remove the retainer from the rubber blade
that has been removed, and mount to a
new rubber blade.
u Correctly align the rubber protrusion and
the retainer grooves.
6. Slide the new wiper blade onto the holder
from the bottom end.
u The tab on the holder should fit in the
indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm,
then push down the lock tab.
8. Lower the passenger side wiper arm first,
then the driver side.
Blade
Retainer
Blade
Indent
13 CR-Z-31SZT6200.book 251 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Home
QRG
Index
2013 CR-Z
Main
tenan
ce
TOC