2 inspecting and changing fuses p. 300, Inspecting and changing fuses – HONDA 2013 CR-Z User Manual
Page 301
300
uu
Fuses
u
Inspecting and Changing Fuses
Han
d
lin
g the U
n
expected
Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK
(
0
. Turn
headlights and all accessories off.
2. Check the fuses in the engine
compartment.
u
If the fuse is blown, have it replaced by a
dealer.
3 . Inspect the sm all fuses in th e
vehicle interior.
u
If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
1
Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
to
There is a fuse puller on the fuse box.
Fuse
Blown
Fuse
Fuse Puller
13 CR-Z-31SZT6200.book 300 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Home
QRG
Index
2013 CR-Z
TOC