HONDA 2013 CR-Z User Manual

Page 282

Advertising
background image

Continued

281

uu

If a Tire Goes Flat

u

Temporarily Repairing a Flat Tire

10. Unplug the power plug from the accessory

power socket.

u

Handle the compressor and the power
plug carefully. They may be hot in
operation.

11. Unscrew the sealant/air hose from the tire

valve stem. Reinstall the valve cap.

12. Press the pressure relief button until the

gauge returns to 0 psi (0 kPa).

13. Apply the repair notification label to the

flat surface of the wheel.

u

The wheel surface must be clean to
ensure the label adheres properly.

1

Injecting Sealant and Air

If the required air pressure is not reached within 10
minutes, the tire may be too severely damaged for
the kit to provide the necessary seal and your vehicle
will need to be towed.

See a Honda dealer for a replacement sealant bottle
and proper disposal of an empty bottle.

Sealant/Air Hose

Valve
Stem

Repair
Notification
Label

13 CR-Z-31SZT6200.book 281 ページ 2012年10月25日 木曜日 午後9時9分

Home

QRG

Index

2013 CR-Z

Han

d

lin
g the U

n

expected

TOC

Advertising
This manual is related to the following products: