HONDA 2013 CR-Z - Manual (Page 289)

288
uu Jump Starting u
Han
d
lin
g the U
n
expected
Once your vehicle's engine has started, remove the jumper cables in the
following order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster
battery - terminal.
3. Disconnect the jumper cable from your vehicle's + terminal.
4. Disconnect the other end of the jumper cable from the booster
battery + terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■ What to Do After the Engine Starts
13 CR-Z-31SZT6200.book 288 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Home
QRG
Index
2013 CR-Z
TOC