HONDA 2012 Pilot - Manual (Page 169)

The left and right halves can be
folded separately.
To unlatch the detachable anchor
before folding the seat-back, insert
the latch plate into the slot on the
side of the anchor buckle (see
page
) and allow the seat belt
to retract. Store the detachable
anchor and seat belt latch plates in
the retractor housing.
Lower the head restraints to their
lowest positions.
Pull up the handle on the outside
of the seat-back.
Fold the seat-back forward.
Reverse this procedure to return the
seat to the upright position. Make
sure the seat is locked securely
before driving.
Make sure that the folded seat-back
does not press against the front
passenger’s seat, as this could cause
the weight sensors to work
improperly.
To get into the third row seats, pull
up the lever on the side of the
passenger’s side second row seat-
back. The seat-back will tilt forward,
and then can be slid forward.
After you return the seat-back to the
upright position, push the whole seat
backwards until it latches. Make
sure the seat is fully latched before
sitting in it.
2.
3.
4.
1.
163
Folding the Second Row Seats Third Row Access
Seats
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
161
RELEASE LEVER
11/08/01 08:43:57 31SZA630_168