Changing a flat tire – HONDA 2012 Pilot User Manual

Page 621

Advertising
background image

If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area to stop
that is far away from the traffic lanes.

Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.

Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.

Open the tailgate.

Push the rear edge of the handle
to raise the handle loop and pull up
the loop to raise the cargo area
floor.
Remove the cargo area floor.

2.

1.

3.

4.

CONTINUED

Changing a Flat Tire

T

a

k

ing
Ca
re

of
th

e

U

ne
x

p

e

c

te

d

613

JACK

TOOLS

SPARE TIRE

CARGO AREA
FLOOR

The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.

Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.

11/08/01 11:10:42 31SZA630_620

Advertising
This manual is related to the following products: