HONDA 2012 Pilot - Manual (Page 225)

You can use the RDS program
search or scan function even if the
RDS information display function is
off. In this case, the display shows a
frequency in place of a RDS station
name. If you do nothing, the system will
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
The scan function samples all
stations with strong signals on the
selected RDS category. To activate it,
first press either side of the
FOLDER bar to select an RDS
category, then press and release the
SCAN button. You will see SCAN in
the display. The system will scan for
a station with a strong signal in the
selected RDS category. You will also
see the selected RDS category name
blinking while searching it. When it
finds a strong signal, it will stop and
play that station for about 10 seconds.
If the system does not find a station,
‘‘NOTHING’’ blinks for about five
seconds, then the system goes back
to the last selected station.
RDS Program SCAN
Playing the FM/AM Radio (U.S. LX model)
Fe
a
tu
re
s
217
11/08/01 08:53:31 31SZA630_224