HONDA 2013 Accord Crosstour - Manual (Page 169)

167
uu Audio System u Region Setting *
Features
Region Setting *
The audio system’s region setting will be lost when the battery is disconnected or
goes dead.
If the Region Select screen appears, you need to set the region for the audio
system. Follow the steps below:
1. Press
to select OK.
2. Rotate to select the region you live in, then press .
3. You will receive a confirmation message on the screen. Rotate to select Yes,
then press .
1 Region Setting *
The region setting is required only when the battery
power is temporarily disconnected. It is set to your
vehicle’s region type by the factory.
You cannot change the setting once you have
completed the setting procedure. Contact a dealer if
you selected an incorrect region.
These indications are used to show how to operate
the MENU/SEL (Selector) knob or the interface dial.
Rotate
to select.
Press to enter.
* Not available on all models
13 CROSSTOUR-31TP66300.book 167 ページ ２０１２年９月２７日 木曜日 午後３時２７分