HONDA 2013 Accord Crosstour - Manual (Page 521)

Continued 519
uu If a Tire Goes Flat u Changing a Flat Tire
Han
d
lin
g the U
n
expected
5. Remove the cover on the cargo area lining
to access the shaft for the spare tire hoist.
6. Attach the short end of the wheel nut
wrench to the spare tire holder shaft.
Turn the wrench to the left to loosen the
shaft.
7. Attach the longer section of the wrench to
the shaft, and turn it until you can see the
spare tire.
u Do not turn the wrench any further
once you feel resistance.
8. Lift up the spare tire holder, then slide the
hook to lift down the holder.
9. Remove the spare tire from the holder.
1 Changing a Flat Tire
NOTICE
The wheel nut wrench supplied with your vehicle is
specially adapted to fit the holder shaft. Do not use
any other tool.
Cover
Wheel Nut Wrench
Spare Tire
13 CROSSTOUR-31TP66300.book 519 ページ ２０１２年９月２７日 木曜日 午後３時２７分