HONDA 2013 Accord Crosstour User Manual

Page 73

Advertising
background image

71

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Malfunction
Indicator Lamp

Comes on when you turn the ignition switch
to ON

(

w

*1

, and goes off either when the

engine starts or after several seconds if the
engine is not started. If “readiness codes”
have not been set, it blinks five times before it
goes off.

Comes on if there is a problem with the
emissions control system.

Blinks when a misfire in the engine’s cylinders
is detected.

Readiness codes are part of the on board diagnostics
for the emissions control systems.

2 Testing of Readiness Codes P. 553

Comes on while driving - Have the vehicle checked
by a dealer.

Blinks while driving - Stop in a safe place where
there are no flammable objects. Stop the engine for
10 minutes or more, and wait for it to cool down.
Then, take the vehicle to a dealer.

2 If the Malfunction Indicator Lamp Comes On or

Blinks P. 535

Charging System
Indicator

Comes on when you turn the ignition switch
to ON

(

w

*1

, and goes off when the engine

starts.

Comes on when the battery is not charging.

Comes on while driving - Turn off the heating and
cooling system

*

/climate control system

*

and rear

defogger in order to reduce electricity consumption.

2 If the Charging System Indicator Comes On

P. 534

Seat Belt
Reminder
Indicator

Comes on and the beeper sounds if you are
not wearing a seat belt when you turn the
ignition switch to ON

(

w

*1

.

If the front passenger is not wearing a seat belt,
the indicator comes on about six seconds later.

Blinks while driving if either you or the front
passenger has not fastened a seat belt. The
beeper sounds and the indicator blinks at
regular intervals.

The beeper stops and the indicator goes off when you
and the front passenger fasten their seat belts.

Stays on after you or the front passenger has
fastened the seat belt
- A detection error may have
occurred in the sensor. Have the vehicle checked by a
dealer.

2 Seat Belt Reminder P. 33

* Not available on all models

13 CROSSTOUR-31TP66300.book 71 ページ 2012年9月27日 木曜日 午後3時27分

Advertising