Compass, Compass calibration – HONDA 2013 Accord Crosstour User Manual
Page 409
407
Features
Compass
*
When you turn the ignition switch to ON
(
w
*1
, the compass self-calibrates, and the
compass display appears.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
1. Turn the ignition switch to ON
(
w
*1
.
2. On the top screen of any audio source,
press and hold
for 5 seconds.
u
The display switches to the Compass
Settings screen.
3. Rotate
to
select
Calibration, then press
.
4. When the display changes to Calibration
Start, press
.
5. Drive the vehicle slowly in two circles.
u
The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
Models with audio touch screen
1
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
1
Calibrate the compass in an open area.
While setting the compass, press the BACK button to
cancel the setting mode and return to the previous
screen.
* Not available on all models
13 CROSSTOUR-31TP66300.book 407 ページ ２０１２年９月２７日 木曜日 午後３時２７分