HONDA 2013 Accord Crosstour - Manual (Page 490)

488
uu Replacing Light Bulbs u Front Side Marker Light Bulb
Main
tenan
ce
Front Side Marker Light Bulb
When replacing, use the following bulbs.
1. Turn the steering wheel all the way to the
opposite side from the light being replaced.
Passenger side: Turn the steering wheel
to the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the holding clips and screw, and
pull the inner fender back.
3. Turn the socket to the left and remove it,
then remove the old bulb.
4. Insert a new bulb.
Front Side Marker Light: 5 W
1 Front Side Marker Light Bulb
Remove the clip by using a flat-tip screwdriver.
2 Low Beam Headlights P. 485
Holding Clip
Screw
Bulb Socket
13 CROSSTOUR-31TP66300.book 488 ページ ２０１２年９月２７日 木曜日 午後３時２７分