HONDA 2013 Accord Crosstour User Manual
Page 487
485
uu
Replacing Light Bulbs
u
Headlight Bulbs
Main
tenan
ce
1. Turn the steering wheel all the way to the
opposite side from the light being replaced.
Passenger side: Turn the steering wheel
to the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the holding clip and screw, and
pull the inner fender back.
3. Push the tab to remove the coupler.
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the headlight
assembly and turn it to the right.
6. Insert the coupler into the connector of the
bulb.
■
Low Beam Headlights
1
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Insert the clip with the central pin raised, and push
until it is flat.
Central pin
Push until the
pin is flat.
Holding
Clip
Screw
Tab
Coupler
Bulb
13 CROSSTOUR-31TP66300.book 485 ページ ２０１２年９月２７日 木曜日 午後３時２７分